|
These FutoFab 510 "Orange Line" front sway bars are 1.125" in diameter with an orange powder coat finish.
The 1.125" front sway bar increases torsional (roll) stiffness at 1.6 times that of a typical 1" diameter aftermarket sway bar.
This design is for cars using non-stock engines in the 510 chassis, like the Nissan SR20, VG30 and KA24 engines *.
Kit Includes:
- Polyurethane bushings and brackets
- Sway bar end links
- General installation instructions *
* This sway bar is for use on modified vehicles with nonstock engine installaions. It will not fit a stock vehicle and may not work with every chassis/engine combination. Contact FutoFab to discuss any concerns, but no guarentees are made regarding fitment due to the many variables present with modified vehicles. Installation requires at a minimum modifications to the stock crossmember and it is reccomended that all modifications be made AFTER the purchase of the sway bar, not before, so that adjustments can be made during modifications to allow for proper fitment.
|
|
Kit Contents |
|
Brackets and End Links |
|
Front Sump Front Sway Bar Installed |
|
Front Sump Front Sway Bar Installed |
|
Front Sump Front Sway Bar Installed - Left Side Bracket |
|
Front Sump Front Sway Bar Installed - Right Side Bracket |
|
|