|
|
|
The FutoFab adjustable lower control arms are available with an optional rubber boot to cover the inner pivot for an additional cost of $15/set. This boot will seal out grit, dirt and moisture that can greatly reduce the life of the joint.
|
|
The inner pivot point on the FutoFab adjustable LCA uses high mis-alignment spacers. The inner radius is covered by the boot while the outer shoulder remains exposed. This allows for full range of movement without compromising the boot's sealing capacity.
|
|
This close-up image shows the rod end boot in place. The shoulder of the high mis-alignment spacer is not covered by the boot. The full range of the joint is not compromised by the boot.
|
|
|
|