|
|
|
FutoFab now sells C&B Rear Camber-Toe Adjusters for the Datsun 510. These are designed for lowered vehicles and use the factory trailing arm pivot bolts.
These adjusters are designed to be used with the original style rubber control arm bushings or mono-ball bushing replacements. If used with polyurethane bushings, any camber-toe adjustment from stock position will cause the bushings to bind.
The range* of adjustment is: 1.5 deg positive to 3 deg negative camber 1" total toe out to 1.4" total toe in
*Your range of adjustment will vary depending on the ride height of your vehicle. Extremely lowered or near stock and raised ride heights may not provide suitable adjustment for your needs.
|
|
See Installation Instructions
|
|
|
|