603-774-6964
dave@futofab.com

FUTO FAB – Serving the Grassroots Motorsports Enthusiast since 1988

Serving the Grassroots Motorsports Enthusiast since 1988

Serving the Grassroots Motorsports Enthusiast since 1988

Home // Wheels and Accessories // Studs and Spacers
Studs and Spacers

Current Price List / Availability

PartPriceApplicationNotes
Wheel Spacers, 1/8" (3 mm)
(4 lug with 3.0" center hole)
$25.00 / pair 4 x 114.3mm (4 x 4.5") bolt circle with .46" holes for 7/16" studs Designed for Datsun Roadsters with 7/16" studs. Holes can be drilled for use with larger studs. Buy Now
Wheel Spacers, 5/16" (8 mm)
(4 & 5 lug with 3.0" center hole)
$42.75 / pair 4 & 5 x 114.3mm (4 & 5 x 4.5") bolt circle with .52" holes for 12mm & 1/2" studs

For use on 4 & 5 x 114.3mm bolt circle Nissans & Datsuns with 12 mm & 1/2" studs. Works to help correct hub offset on cars using 280ZX front struts.

Buy Now
Wheel Studs, M12 x 1.25 - 60 mm Long $3.50 / each Datsun 510, 610, 710 & Z Cars Can be used on all RWD Nissan/Datsun cars with 12.90mm (.508") knurl wheel studs. Ideal for cars using 280ZX front struts and spacers. Buy Now
Wheel Studs, 7/16 - 20 - 1.75" Long $2.00 / each Datsun Roadsters These studs are 1/2" longer than OE Roadster studs. Great for use with VTO wheels to provide proper lug/stud thread engagement. Buy Now
Wheel Studs, 7/16 - 20 - 2.125" Long $3.00 / each Datsun Roadsters These studs are about 3/4" longer than OE Roadster studs. Great for use with VTO wheels to provide proper lug/stud thread engagement. Buy Now
Roadster 1/8" Spacers & 8 Stud Package $48.50 / Package Datsun Roadster, Front This package includes two (2) 1/8" spacers and eight (8) 7/16 - 20, 1 3/4" studs to properly fit VTO wheels on the front of a Datsun Roadster Buy Now
Roadster 1/8" Spacers & 16 Stud Package $64.50 / Package Datsun Roadster,
F & R
This package includes two (2) 1/8" spacers and sixteen (16) 7/16 - 20, 1 3/4" studs to properly fit VTO wheels on the front & rear of a Datsun Roadster Buy Now
 
Spacers and Long Studs

5/16

Spacers and Extended Length Studs

All FutoFab spacers have a 3.0" diameter bore and 6.0" OD with 4x114.3 (4x4.5") bolt patterns.

Our spacers and extended length studs are designed to add that final adjustment to your wheel offset. Spacers can be used to fill out a fender well or to add tire to strut tube clearance if you swap over to 280ZX brakes/struts.

Shown here are 5/16" (8mm) spacers with 12mm stud holes and M12x1.25 - 60mm long studs.

1/8

Datsun Roadsters - Allows proper fit of 73mm center bore wheels

These 1/8" (3mm) spacers are designed to exactly fit the Datsun Roadster front hubs with 7/16” studs. They provide just enough spacing to allow installation of the common 73mm center bore wheels without modification. They can also be used in other applications but the stud holes may need to be enlarged for proper fit.

Offered spacers only or with eight (8) or sixteen (16) 7/16-20, 1.75" long studs (+1/2" longer than stock)

7/16 studs

Datsun Roadster Studs (black oxide finish)

Our Datsun Roadster 7/16-20 studs are 1.75" long, 1/2" longer than OE studs.

They have a .475" knurl with a black oxide finish.

m12x1.25 studs

Datsun Z Cars and 510 Studs (gold cadmium finish)

Our M12x1.25 studs are 60mm long, as much as 28.5mm longer than stock.

Their 12.90mm knurl will fit not just Z Cars and 510's but most Datsun/Nissan vehicles. They are finished in a gold cadmium corrosion resistant finish.
 


Home // Wheels and Accessories // Studs and Spacers
 
Joomla 1.5 Templates by Joomlashack